TWO-COMPONENT DISPENSER
G-280SF Follower Plate Dispenser

Material applicable: RTV Silicone, Epoxy & PU Paste
Shot volume: 2~200cc
Accuracy: ±2% 

Two component type plate dispenser, specific for high viscosity AB glue, non-flow material, Liquid Silicone Rubber (LSR), or thermal paste application. Precise ratio, continuous material transfer, increasing the work efficiency. 

Design for:

Viscous paste such as RTV silicone, epoxy or polyurethane.
Without transfer material to machine reservoir tanks, user can directly install the supplier’s 5 gallon or 55 gallon ram to machine follower plate metering system. Therefore, no additional air trap caused from material refill. By squeezing the material ram, follower plate and its Progressive Cavity metering pump provides repeatable and continues flow of liquid paste.
When follower plate travels to lower limit, it will lead to tank empty warning.
The Progressive Cavity pump is able to provide non-stop continue flow without pump recharging idle

Feature& Benefits :

●Stainless steel construction, easy to clean and maintenance.
●Variable ratio design for precise ratio control.
●Static or Dynamic mixing valve applied for different material requirements.
●Microprocessor controlled.
●Interactive memory setting function creates user friendly interface.
●Multiple variable shot volume program up to 7 sequences.
●Easy shot size and flow rate adjustment
●Progressive cavity pump, supply the material steadily and consistently
●Material tank empty warning.
●Error-protection design, error message display

Optional Features :

D. Dynamic mixing valve: a high speed air motor applied for mixture of resin and hardener when the mixing ratio or viscosities are distinct.

Contact Us

2403

Your message was successfully sent!

Copyright © WASON TECHNOLOGY.