G-260
G-260 Double Liquid Glue Injection Machine (Floor Type)

Optional Features :
D. Dynamic mixing valve: the valve applies an air motor for mixing the resin and hardener by high speed, especially suitable for material with distinct ratio and high viscosities.
V. Vacuum Degassing: Vacuum pump is utilized for material tank de-gassing and for vacuum suction refill.
C. Progressive Cavity Pump: If the material contains fillers, cavity pump has longer durability. Ordinary gear pumps and piston pump would tend to wear out easily.
R. Recirculation unit: This system enforces material from auto valve back to material tank when its fillers or tends to settle down or crystallize during idle.
A. Auto-refill: When end-user has problem with high frequency of refilling workload, auto-refill unit helps to reduce the labor's loading, by  pumping (pneumatic transfer pump) liquid to dispenser pressure tanks.


1. Stainless steel 304 machine structure.
2. Two major mixing solution: Static or Dynamic, customized combination for different material requirements.
3. Microprocessor controlled.
4. Interactive memory setting function creates user friendly interface.
5. Precise gear pumps or progressive cavity pump, supply the material steadily and consistently
6. Tank heater, agitator, or vacuum degassing as optional features.
7. Tank liquid level sensoring alarm.
8. Digital temperature controller for tank and transfering hose.
9. Re-circulation funcion to prevent sedimental issue in the hose and connector.
10. Error-protection design, error message display.

Contact Us

9152

Your message was successfully sent!

Copyright © WASON TECHNOLOGY.